The Stunning and Symbolic Appeal of Tungsten Ring

April 16th, 2010 by wys


Tungsten Rings can easily be removed in emergency situations, though the method most effective does not consist of “cutting” it off. The only tool one will need is a standard set of vice grip style locking pliers, & we will explain exactly how to remove a Tungsten Ring if it will not slide off in the normal fashion. Do not attempt to use standard ring cutters.

Place the vice grip style locking pliers over the tungsten ring & adjust the jaws to clamp lightly. Release & adjust the tightener one third of a turn & then clamp to the tungsten ring again. Repeat until a crack is heard, & then continue clamping in different positions until the hard material breaks away. Take care not to slide or rotate the cracked tungsten ring on the finger. If the tungsten ring contains an inlay of gold or silver, the exposed gold or silver can then be cut or clipped in the usual fashion. A tungsten ring is very strong and this is the best, safest way to remove it under emergency circumstances. See video from a knowledgeable tungsten ring company:

Usually medical situations in which this becomes a necessity consist of excessive weight gain & h& injuries. When we have seen wedding b&s be removed in the past, it is almost always because they have bent out of round or been smashed, making it incredibly uncomfortable & painful for the person wearing the ring. A tungsten ring will never bend. In fact, if you were to drop something very heavy on it or slam it in the trunk of your car, it would break before it would bend, & simply fall off your finger. In this case, you would likely be safer wearing a tungsten ring than one made with precious metals.

Remember, the safest thing to do is just remove your tungsten ring when you are lifting weights, rock climbing, or anything of the sort.

Leave a Reply