Read These Silver Clay Tips Before Your Next Project

October 23rd, 2010 by wys

Silver clay? What the heck is that? Is it clay made out of silver?
Silver clay, precious metal clay, art metal clay, and art clay silver are all different terms and makes of “clay” that can be magically turned into silver and gold.

These innovative metal clays have been about since the 1990’s. Jewellery enthusiasts and hobbyists can now mold and form precious metal as simply as play dough.

Jewelry making naturally goes back to man’s earliest days. The difference nowadays is that you now don’t have to bang or cast your metal to make jewelry if you don’t need to. Silver clay now makes it possible to make real metal forms without these normal strategies.

Here is how metal clay works. Silver and gold metal clays are composed from fine metal particles suspended in an organic binder. This binder allows you to mildew and shape the clay as you would potter’s clay. Once you are pleased with the form, you let your project dry for a minimum of twenty-four hours ( or more ). You then fire it in a kiln or by utilizing a hand torch. The binder burns away, leaving the fused metal behind in the form you shaped it.

Before you grab a pile of silver clay and go at it though, you’ll want to keep 1 or 2 rules in mind. Silver clay is not cheap, so you don’t want to waste it.

Tips for Working With Silver Clay

Here are a number of tips for working with silver clay :

–>Metal clays shrink 10-30% when fired. Be sure to take a look at your package for shrinkage levels particularly if you are making rings or other objects that have to be actual fits.
–>Not all metal clays can be hand torch fired. If you will not be using a kiln be sure to check that your kind of silver clay is “low fire”.
–>Only tiny pieces should be torch fired. Pieces larger than 25g should be kiln fired.
Silver clay is expensive. The gold version particularly is terribly costly. Be sure to shop carefully and follow instructions punctiliously so you don’t burn your money needlessly.

  • different clays have different firing temperatures so be certain to match your firing temperature to your clay type.
  • Metal clay is water soluble and can be fell with water. Keep a small bowl of water or a spritzer at hand while you work. If it starts to dry out while working, you are able to add a little bit of water to dampen it.
  • You can speed up drying time by placing your piece in a low heat range. ( 150-200 degrees fahrenheit ). Pieces finely than your palm typically take approximately twenty-four hours to entirely dry and toughen without the oven treatment.

Now you have some silver clay tenets, I bet you are psyched. You want to work with this innovative material now! What will you make first?

Want to discover more about precious metal clay? Read more silver clay articles.

Leave a Reply